Stirred Liquid Baths
| Silicone fluid pricing | Silicone fluid properties |
EDL ULTRA-BATH
EDL is proud to announce the introduction of this new line of stirred liquid baths. The new ULTRA-BATHS from the Metrology division at EDL Inc. incorporate new designs that are packed with features that facilitate quick, accurate, and easy calibrations. The design and features of the ULTRA-BATH line are the result of years of researching and using commercially available stirred liquid baths.
In the unlikely event that a component should fail, the unique modular construction of these baths allows you to replace components without having to send the entire bath in for repair, and with EDL, we have a service division that can come out and repair your bath on site.
EDL ULTRA-BATH with Integrated Validation System
The new ULTRA-BATH with Integrated Validation System (IVS) is a complete temperature calibration system designed to comply with 21CFR part11. This new design is packed with features that facilitate quick, accurate, and easy calibrations. All connections are conveniently located on the front panel so multiple baths can be spaced only a few inches apart from each other.
EDL EXCLUSIVE FEATURES
- Redundant and Fully Independent high and low temperature alarms with key lockout
- Built-in Stainless Steel work and drain tray
- Drive belt stirring motor assembly with independent bearing Support
- Refrigeration system contains built in receiver, accumulator, and crank case heater (prevents high head pressure and oil-less startups)
- Ethernet connectivity is standard and Remote monitoring is available through ethernet connection
- 12-Inch touch screen operation
- Hidden drain with lockout protection
- Control system is mod-bus, profi-bus and RS-485 compatible
- Water cooled version available for noise reduction
- Modular design makes servicing easy, no need to purchase high cost custom components
FEATURES
- Welded tubular steel frame 11 gauge (1/8) wall
- Secure locking fluid and container storage area
- Programmable soft start using ramp to set point
- All front panel controls and operator interface
- Pressure controls available as manual or automatic
- Full Two-Year Warranty on all parts and labor
- Tecumseh compressor system
- Sealed tank system allows tank pressurizing with specialty gasses
preventing moisture and ice build up in the tank
- 21CFR Part 11 compliant, including hard copy documentation
- The bath is a fully portable 21CFR Part 11 validation/calibration system
- Filtered air refrigeration and electronics compartment
- All bath ranges from -40ºC to +550ºC are uniform size
and shape allowing simple and consistent lab installation and expansion
- Do not ship your baths for repair, EDL provides optional Onsite service for
all your bath needs
- The ULTRA-BATH has 7 Inches of height adjustment
- Built in castors for easy portability
- High temperature SS drain valve
- Fast heat up and cool down
- Up to 42 input channels with independent A/D's per channel
- EMI filtered power for UUT
- All circuitry is fuse protected
Specifications
Physical
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81cm (32 in.)
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69cm (27 in.)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174cm (68.5 in.) min. to 192cm (75.5 in.) max.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (with Validation System)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142cm (56 in.) Min. to 160cm (63 in.) max
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (bath only)
Dry Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129kg 285 lbs.
Wet Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 lbs.
Fluid Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 51L 13.5 gal.
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110V/220 VAC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Amp Min. – 60Hz
Ethernet Connection . . . . . . . . . . . . . . . . . . . . . RJ45
Thermal
Operating Range 1 . . . . . . . . . . . . . . . . . . . . . . .-40°C to 100°C
Operating Range 2 . . . . . . . . . . . . . . . . . . . . . . 100°C to 200°C
Operating Range 3 . . . . . . . . . . . . . . . . . . . . . . 200°C to 550°C
Stability/Uniformity Range 1 . . . . . . . . . . . . . . .±0.005°C
Stability/Uniformity Range 2 . . . . . . . . . . . . . . .±0.010°C
Stability/Uniformity Range 3 . . . . . . . . . . . . . . .±0.025°C
Integrated Validation System
12 channel Input . . . . . . . . . . . . . . . . . . . . . . . . . Thermocouple, millivolt, Volt, milliamp, RTD,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ohms, Digital (not channel 1)
Thermocouple Types . . . . . . . . . . . . . . . . . . . . . .B, C, D, E, G2, J, K, L, N, R, S, T, U,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NiMo/NiCo, Platinel, Ni/NiMo,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pt20%Rh/Pt40%Rh
RTD inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cu10, Pt100, Pt100A, JPT100, Pt1000,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ni100, Ni120, Cu53
| Catalog pages will soon be available in Adobe Acrobat® (PDF) format |  |
Contact The EDL
Webmaster for Web site Issues
|
|
