MSB-500

View of all Stainless construction with Three inch access port and touch screen.

MSB-500

The MSB-500 stirred liquid salt bath gives you the portability of a small table top bath with the accuracy of a full size bath.

Features

• Stainless Steel Housing

•Less than 3.8 Liters of fluid

• Heated Drain with safety cap

• DC Gear Motor Stirring

• RS-232 Connectivity

• Touch Screen Control

• Built in Sensor Holders

• Full 12 Month Warranty

• Can be used with either Salt or Silicone

EDL proudly introduces the MSB-500, Mini Salt Bath, a truly innovative solution to the growing need for smaller and easier to use high temperature stirred liquid baths. The MSB-500 is the clear alternative to large style salt baths that require large volumes of salt, long stabilization times, and slow temperature changes.

With only a 15” square foot print and weighing less than 50 lbs, this bath is well suited for bench top laboratory use and field portability. Start up time from a solid to 220°C is approximately 60 minutes, plus 30 minutes for stabilization. Heating rates are fast because there is only 14 lbs of salt or slightly less than one gallon (3.7L) of fluid; rates greater than 3.5°C per minute allow the user to calibrate numerous points throughout the day.

Imagine, less than 60 minutes to go from 220°C to 420°C. The 10” deep tank provides sufficient depth for the use and calibration of SPRT's and a wide variety of industrial thermometers. The tank is large enough to use a high temperature equalization block to further improve stability and uniformity.

The simple touch screen interface offers simple presets and easy navigation for fast and reliable setup and temperature changes.  All important information setup data is easily accessible.

The MSB-500 is protected by multiple safety circuits. The stirring motor is locked out until the salt is in a liquid state. If the controller, the primary relay, or the control RTD should fail and cause a thermal runaway condition, an independent supervisory circuit will shut the system down until the problem is fixed and it is manually reset.

Shipping the unit is also very cost effective; it can be sent via Fed-EX or UPS.

Specifications:
Tank Dimensions...................................... 4” x 6” x 10”Deep (3.78L)
Tank Opening............................................ 3” Dia.
Overall Size.................................................12.5” x 14.5” x 17.5”
Stability & Uniformity............................... 200°C=10mK, 500°C=20mK
Set Point Accuracy.................................. .±0.2°C
Temperature Range................................. 200°C - 500°C
Power...........................................................110/120 VAC 10 Amp 50/60 Hz
Interface...................................................... RS232
Control sensor.......................................... RTD
Stirred Liquid............................................. Salt or Silicone fluid
Part #............................................................ MSB-500
Price............................................................. $7 250.00